SASH SHUTTER
Our sash shutters are the ideal solution for regulating and intercepting flows with solid particles, especially filamentous ones. The closure of the valve via a blade allows for the complete interruption of the fluid flow, ensuring a tight seal. Additionally, pressure losses are significantly reduced as there are no components inside the duct.
Our product lines
Pressed
The pressed line of AIRCOM Sash Shutter is designed to offer a lightweight and minimalist solution, using a reduced number of components. This is combined with a decreased need for maintenance and high long-term reliability of this line.
This line is entirely constructed from steel S235 (formerly Fe360) or AISI304. The two parts of the damper are stamped and joined together without the presence of welds.
Reinforced
The Reinforced line of AIRCOM Sash Shutters is designed to ensure excellent performance even in the most demanding and stressful working environments or in the presence of frequent opening and closing cycles.
This series, composed of two flanges in galvanised steel S235 (formerly Fe360) or AISI304, is joined with bolts, with brass spacers interposed to facilitate the movement of the diaphragm, avoiding possible blockages. Gaskets are fixed at the front and rear ends to ensure the seal of the device.
With Gasket
The shutter with gasket line of AIRCOM Sash Sutter is designed to ensure excellent performance even in workplaces where higher depressions are required.
This series, composed of two flanges in galvanised steel S235 (formerly Fe360) or AISI304, includes a seat for the gaskets (made of closed-cell material and nylon), which adhere to the diaphragm, allowing smooth sliding and eliminating air leakage and unwanted noises caused by air seepage.
Inclinated
The inclinated line of AIRCOM Sash Shutter features a 45° inclination of the diaphragm relative to the duct. This inclination allows for more precise control of airflow and is particularly suitable when there are specific space constraints.
This line consists of two flanges in galvanised steel S235 (formerly Fe360) or AISI304, joined with bolts, with brass spacers interposed to facilitate diaphragm movement and prevent possible blockages. Gaskets are fixed at the front and rear ends to ensure device sealing.
On Pipe
The shutters on pipe series of AIRCOM Sash Shutters utilise a lever mechanism for opening and closing. This system offers several advantages in terms of simplicity, reliability, and ease of installation.
They are entirely constructed from steel S235 (formerly Fe360), except for the rubber lever mechanism, which serves to reduce air leakage and noise when the damper is open.
Discover the differences between our sash shutters
Find the line that perfectly fits your needs.
| Pressed | Reinforced | With Gasket | Inclinated | On Pipe | |
|---|---|---|---|---|---|
| Air and solid residue blocking | ✔ | ✔ | ✔ | ✔ | ✔ |
| Minimised leakage | ✖ | ✔ | ✔ | ✔ | ✖ |
| Available diameters | Ø80 ÷ Ø300 | Ø80 ÷ Ø1000 | Ø75 ÷ Ø300 | Ø150 ÷ Ø500 | Ø80 ÷ Ø350 |
| Maximum depression | 450 mmH20 | 500 mmH20 | 2000 mmH20 | 500 mmH20 | 500 mmH20 |
| Standard drives | Electric, Manual, Pneumatic | Electric, Manual, Pneumatic | Manual, Pneumatic | Manual, Pneumatic | Manual |
| On-demand drives | Electro-Pneumatic | Electro-Pneumatic | Electro-Pneumatic | Electro-Pneumatic | - |
Didn't find what you're looking for?
Discover our line of products for plant safety in case of explosions or flames
If you haven't found what you're looking for yet, don't hesitate to contact us!!
Headquarters
Opening hours
- Mon - Fri
- - -
- Sat - Sun
- Closed
|
Questa azienda è presente anche su 
e 